Seilspannklemme CE für isolierte Freileitungsseile, ein-oder mehradrig und Bündelkabel Art. Nr. 7070-7094

• Made in Germany
• automatic hold on the rope by spring
• with long, parallel clamping jaw and large pulling eye
• galvanized
• also suitable for natural and synthetic fiber ropes
• low weight
• wide range of applications
• easy handling due to best ergonomics
• remote release possible: hole in the housing

Quality assurance measures: TÜV certified management according to the requirements of ISO 9001:2015. All tools are stamped with the CE mark, as well as with: Load capacity /WLL, year of manufacture. Applied national standards and accident prevention regulations (UVV):

• UVV "General regulations (VBG 1)
• UVV "Winches, lifting and pulling equipment (VBG D8)
• DIN 15020 Part 1 Lifting equipment

All tools are stamped with the CE mark, as well as with: Rope diameter, rope type, load capacity /WLL, month and year of manufacture. Universal application for overhead line and bridge construction, industry and agriculture.

Instructions for use, maintenance and care:

• Check the clamp for damage/cracks and proper function before each use.
• Use the correct clamp type and appropriate size.
• Always keep the clamping channel of the jaws and the teeth clean, dry, and free of oil and grease to prevent the ropes from slipping.
• Do not apply sudden loads to the clamp.
• Increase the pulling force slowly to prevent the rope from slipping through and destroying the teeth.
• Only oil the rivets!

Attention: Do not exceed the load capacity / WLL under load.

Article No.		7070	7087	7094
Rope Ø single core	mm	8 - 25	16 - 34	28 - 45
Rope cross-section four-core	mm²	4 x 16 - 35	4 x 35 - 70	4 x 95 - 150
Eye size D	mm	27 x 40 oval	30 x 45 oval	30 x 45 oval
Breaking load	approx. Kg	1,250	3,000	4,500
Load capacity	Kg	500	1,200	1,800
Remote release	Ø mm	6.0	6.0	6.0
Weight	kg	0.950	2.190	3.200